K2-909
ULTIMATE REINFORCED MORTAR
Ultimate Reinforced Mortar is a two part, polymer modified floor mortar. Its Portland cement and quartz based of high performance, fast-setting and non-sag mortar for vertical and overhead surfaces.
Details
- Extremely low shrinkage.
- High compressive and flexural strengths.
- Excellent freeze / thaw durability and resistance to deicing salts.
- Improved carbon dioxide resistance.
- Compatible with coefficient of thermal expansion of concrete.
- Weather durability; UV-Resistance.
Technical Data
| Tools | Trowel |
| Drying Time | Touch Dry 2-4 Hours, Recoat 6-8 Hours (at 25°C) |
| Thickness | 3mm, 5mm |
| Available Sheen | Flat |
| Viscosity | <500 m.Pas at 25°C |
| Solid Content | 80±2% |
| Available Size | 6:15 kg |
| Thinner | Water |
| Shelf Life | 36 months unopened condition |
| Color | 909 Gray |
Applications
Surface Preparation
- All new masonry, concrete, cement or block must be cured for 30 days at recommended.
- Remove all loose paint and defective paint if possible, oil, fluid, moss or other substances on the surface. In severe cases, wash the surface with water, make sure the surface is completely dried and clean. All holes cracks must be properly patched.
Application Details
- Product must be completely agitated (manually only) before use.
- Intermix the resin compound with aggregate for at least three minutes before application.
- Intermix containers of same product to ensure color and seen uniformity.
- Dilution is not recommended. However if the dilution is required, do not dilute more than 10% of clean water.
- Priming and application at the recommended film thickness / practical coverage when application to new surfaces.
Downloads
Not all products are available online. Please contact your store or sales representative for more information.
| Datasheet | Adobe Reader Download |
|---|---|
| Safety Datasheet | Download |
| Product Datasheet | Download |
